FACTORS AFFECTING THE FAILURE OF CALF LINES OF DRILLING RIGS

Authors

  • Василь Трифонович Іващенко Ivano-Frankivs'k National Technical University of Oil and Gas
  • Михайло Михайлович Лях Ivano-Frankivs'k National Technical University of Oil and Gas
  • Дмитро Юрійович Журавльов Ivano-Frankivs'k National Technical University of Oil and Gas
  • Вадим Владислович Михайлів Ivano-Frankivs'k National Technical University of Oil and Gas

Keywords:

tensile stress, bending, dynamic loading, fatigue strength, rope branches, round-trip operations.

Abstract

The paper analyses the main factors influencing the durability of a calf line. They are the nonsteady cyclic nature of changes in tensile stress and bending stress in rope wires, dynamic (oscillatory) character of the system operating mode: drilling stem - calf line - drilling rig.
The process of wearing the material of rope wires is characterized: inside the rope and the external one.
The quantitative estimation of the dynamic loading effect on the accumulation of fatigue factors is considered taking into account the fatigue curve of the rope.
The analytical dependences of the influence of constructive and regime parameters of the work of the drilling line systems and their characteristics
influencing the failure of the calf line are discussed.

References

Ефимченко С.И. Расчет и конструирование машин и оборудования нефтяных и газовых промыслов. Ч. 1. Расчет и конструирование оборудования для бурения нефтяных и газовых скважин. Учебник для вузов / С.И. Ефимченко, А.К. Прыгаев. – М.: ФГУП Изд-во «Нефть и газ» РГУ нефти и газа им. Губкина, 2006. – 736 с.

Злобин Б.А. Скоростная проводка скважин и резервы новой техники / Б.А.Злобин. – М.: Надра, 1977. – 309 с.

Муравенко В.А. Мобильные, передвижные буровые установки и агрегаты / В.А. Муравенко, А.Д. Муравенко. – Ижевск: Изд-во ИжГТУб, 2005. – 548 с.

Пат. 84910 С2 України МПК G01L 5/04 G01M 7/02 G01N 3/32 G01N 03/56 Пробіжна машина для випробовування канатів / Б.Д. Малько, В.Р. Харун, М.М. Лях, В.І. Артим: Заявник та власник патенту: Івано-Франківський національний технічний університет нафти і газу – No 200609967; Заявн. 18.09.2006; Опубл. 10.12.2008, Бюл. No23.

А. с. No 1271963 Оптимальная отработка талевых канатов на буровых скважинах / М.М. Лях, Т.М. Сабан, Ю.Н. Медвидь, А.М. Кравченко. – М.: ВНИИОЭНГ, 1985. – С. 17-25.

Published

2019-02-12

How to Cite

Іващенко, В. Т., Лях, М. М., Журавльов, Д. Ю., & Михайлів, В. В. (2019). FACTORS AFFECTING THE FAILURE OF CALF LINES OF DRILLING RIGS. PRECARPATHIAN BULLETIN OF THE SHEVCHENKO SCIENTIFIC SOCIETY. Number, (2(38), 292–300. Retrieved from https://pvntsh.nung.edu.ua/index.php/number/article/view/55

Most read articles by the same author(s)