ANALYSIS OF BORING PUMP OPERATION MODES

Authors

  • Михайло Михайлович Лях Ivano-Frankivs’k National Technical University of Oil and Gas
  • Василь Трифонович Іващенко Ivano-Frankivs’k National Technical University of Oil and Gas
  • Іван Федорович Концур Ivano-Frankivs’k National Technical University of Oil and Gas
  • Олег Андрійович Плитус Ivano-Frankivs’k National Technical University of Oil and Gas

Keywords:

boring pump; hydrolic part of pump; intaken line; post and cylinder unit; cavitation; collector; gas content

Abstract

The results of analytic investigation of intaken operation modes of piston pumpes are given. The critering of in taken pumping are figured out. Three intaken operation modes are: without cavitation with limited covitation with limited covitation with developed cavitation and the reasons of these proceses are observed.

References

1. Ефимченко С.И. Расчет и конструирование машин и оборудования нефтяных и газовых промыслов. Часть 1. Расчет и конструирование оборудования для бурения нефтяных и газовых скважин. Учебник для вузов / С.И.Ефимченко, А.К.Прыгаев. – М.: ФГУП Изд-во «Нефть и газ» РГУ нефти и газа им.Губкина, 2006. – 736с.
2. Николич А.С. Поршневые буровые насосы / А.С.Николич. – М.: Недра, 1973. – 224 с.
3. Караев М.А. Гидравлика буровых насосов / М.А.Караев. – М.: Недра, 1983. – 208 с.

Published

2019-02-25

How to Cite

Лях, М. М., Іващенко, В. Т., Концур, І. Ф., & Плитус, О. А. (2019). ANALYSIS OF BORING PUMP OPERATION MODES. PRECARPATHIAN BULLETIN OF THE SHEVCHENKO SCIENTIFIC SOCIETY. Number, (1(33), 320–327. Retrieved from https://pvntsh.nung.edu.ua/index.php/number/article/view/130

Most read articles by the same author(s)