TY - JOUR AU - Мойсишин, В. М. AU - Lyskanych, M. V. AU - Zhovniruk, R. A. AU - Majkovych, Ye. P. PY - 2019/09/27 Y2 - 2024/03/28 TI - ANALYSIS OF STAND RESEARCH RESULTS OF AXIAL DYNAMIC FORCE IN DRILLING BY THREE ROLLER CONE BIT: Array JF - PRECARPATHIAN BULLETIN OF THE SHEVCHENKO SCIENTIFIC SOCIETY. Number JA - Number VL - IS - 1(53) SE - Oil and Gas Industry DO - 10.31471/2304-7399-2019-1(53)-81-93 UR - https://pvntsh.nung.edu.ua/index.php/number/article/view/1089 SP - 81-93 AB - <p><em>The purpose of the proposed article is to establish the causes of oscillations of drilling tool and the basic laws of the distribution of the total energy of the process of changing the axial dynamic force over frequencies of spectrum.</em></p><p><em>Variable factors during experiments on the classical plan were the rigidity of drilling tool and the hardness of the rock. According to the results of research, the main power of the process of change of axial dynamic force during drilling of three roller cone bits is in the frequency range 0-32 Hz in which three harmonic frequency components are allocated which correspond to the theoretical values of low-frequency and gear oscillations of the chisel and proper oscillations of the bit.</em></p><p><em>The experimental values of frequencies of harmonic components of energy and normalized spectrum as well as the magnitude of the dispersion of the axial dynamic force and its normalized values at these frequencies are presented. It has been found that with decreasing rigidity of the drilling tool maximum energy of axial dynamic force moves from the low-frequency oscillation region to the tooth oscillation area, intensifying the process of rock destruction and, at the same time, protecting the tool from the harmful effects of the vibrations of the bit. Reducing the rigidity of the drilling tool protects the bit from the harmful effects of the vibrations generated by the stand. The energy reductions in these fluctuations range from 47 to 77%.</em></p> ER -